Specifications
| Capacity |
60g |
| 0.02g |
| Minimum readability |
0.001g |
| 0.01/0.1% (Selectable) |
| Repeatability |
0.15% (2g) |
| 0.05% (5g) |
| 0.02% (10g) |
| Drying Heater |
Straight type halogen heater |
| Power |
400W |
| Temperature range |
50-200°C (1°C increments) |
| Setting |
(There is a time restriction when exceeding 180°C.) |
| Display |
LCD with backlight |
| Pan size |
95mm dia |
| Dimension |
(W×D×H) mm 202 × 336 × 157 |
| Weight |
4kg |
| Operational temperature and humidity range |
5 to 40°C, 85%RH or lower |
| Measurement modes |
Standard |
| (Easy start/Automatic end/Timed end) |
| Rapid drying |
| (Easy start/Automatic end/Timed end) |
| Slow drying |
| (Easy start/Automatic end/Timed end) |
| Step drying |
| (Easy start/Automatic end/Timed end) |
| Timer setting |
1-120 minutes or continuous |
| (max 12 hours) |
| Interface |
RS-232C (9-pin connector) I/O port
|
| |
USB port |
| Measurement conditions data memory |
10 |
| Data memory |
100 |
Optional accessories
| Optional accessories |
Printer EP-80 |
| Printer EP-90 |
| In-use protection cover for display (5 pieces) |
| Aluminum sheet |
| Fiberglass sheet |
| Temperature calibration kit |
| Sample pan (SUS) |
| RS-232C cable |
| USB connection cable |
| Halogen heater for replacement |
This page may contain references to products that are not available in your country.
Please contact us to check the availability of these products in your country.