Multi Mode Inlet Liner (MMI)
Multi Mode Injection (MMI)
The Multi-Mode Injector Unit enables a diversity of injection modes, such as: split, splitless, LVI, thermal desorption (TD), pyrolysis and OCI. A selection of liners suitable for MMI can be found below. Cyclo liners are especially interesting for heavy contaminated samples or where quartz wool should not be used due to its active sites.
MMI liners have a different liner geometry than the SPL liners. MMI liners will not fit in the SPL Injector and SPL liners not in MMI unit.
Standard recommendation:
227-36700-01
227-36701-01
227-36713-01
| P/N | Wool | Description | |
|---|---|---|---|
| 227-36700-01 |
![]() |
Yes | Xtra Inert Liner; Split; (max. temp. 350 °C); (5 pcs) |
| 227-36701-01 |
![]() |
Yes | Xtra Inert Liner; Splitless; (max. Temp. 350 °C); (5 pcs.) |
| 227-36707-01 |
![]() |
No | Xtra Inert Liner; Cyclo for Split; (max. temp. 350 °C); (5 pcs) |
| 227-36702-01 |
![]() |
No | Xtra Inert Liner; Cyclo for Splitless; (max. Temp. 350 °C); (5 pcs.) |
| 227-36704-01 |
![]() |
Yes | Xtra Inert Liner; Split/Splitless Liner for Large Volume injection (LVI); (max. Temp. 350 °C); (5 pcs.) |
| 227-36711-01 |
![]() |
Yes | Xtra Inert Liner; Split/splitless with antibackflush taper; (max. Temp. 350 °C); (5 pcs.) |
| 227-36709-01 |
![]() |
Yes | Xtra Inert Liner; for splitless with medium volume; (max. Temp. 350 °C); (5 pcs.) |
| 227-36710-01 |
![]() |
Yes | Xtra Inert Liner; for split with low volume; (max. Temp. 350 °C); (5 pcs.) |
| 227-36706-01 |
![]() |
No | Xtra Inert Liner; low volume for SPME Arrow; (max. Temp. 350 °C); (5 pcs.) |
| 227-36705-01 |
![]() |
No | Xtra Inert Liner; Liner with low volume for SPME;(max. Temp. 350 °C); (5 pcs.) |
| 227-36708-01 |
![]() |
No | Xtra Inert Liner; for Gas Analysis; (max. Temp. 350 °C); (5 pcs.) |
| 227-36703-01 |
![]() |
No | Xtra Inert Liner; Direct injection (OCI); (max. Temp. 350 °C); (5 pcs.) |
| 227-36713-01 |
![]() ![]() |
Yes | The Entry Kit includes Xtra Inert Split Liners (227-36700-01, 5 pcs), Xtra Inert Splitless Liners (227-36701-01, 5 pcs), and O-Rings for MMI (227-36712-01, 10 pcs). This Entry Kit is compatible with SPL for Agilent and Thermo GC systems. |
O-Ring (MMI)
| P/N | Description | |
|---|---|---|
| 227-36712-01 |
![]() |
O-Ring; MMI (Maximun usage temperature: 450 °C); (10 pcs.) |











