Optic Multimode Injection

The Optic multimode inlets enable a diversity of injection modes, such as: split, splitless, LVI, thermal desorption (TD), pyrolysis, OCI, and difficult matrix introduction (DMI). A selection of liners suitable for Optic‑4 and Optic-3 can be found below. Fritted liners can be packed with a suitable material and can be used, among others, for LVI, TD, solid sampling and pyrolysis applications.

Standard recommendation:

961-01453 - for Split/Splitless applications
961-01008 - for Split applications
961-01274 - for Splitless applications

 

Specifications & Ordering Information

P/N		Description
961-01453		Split/Splitless fritted liner
961-00996		Split/Splitless fritted liner, silanized* – for polar compounds, i.e. pesticides
980-06477		Split/Splitless fritted liner with taper – for trace, active samples
961-01008		Split liner
961-01274		Splitless baffled liner for high boiling analytes
980-27912		Splitless baffled liner, silanized* – for polar compounds, i.e. pesticides
961-01004		Straight through liner, 1 mm ID – ideal for SPME fibers
980-21334		Straight through liner, 1.8 mm ID – ideal for SPME arrows
980-03375		DMI Tapered liner, for Difficult Matrix Introduction, e.g. non-volatiles and/or solid-like suspended matrix, to be used with DMI sample vials P/N 980-08515 (30 µl) or P/N 980-11894 (60 µl)

*Water and/or temperatures above 320 °C will destroy the silanization.

Each P/N includes 5 liners. Unless stated otherwise, all P/N can be used up to 600 °C.

Standard recommendation:

980-13782 - for standard LVI applications
 

Specifications & Ordering Information

P/N		Description
980-13782		Fritted liner packed with Chromosorb W ~ 150 µL, for PAHs, mineral oils, drugs of abuse (max. temp. 350 °C)
980-12174		Sintered Glass liner with Taper ~ 50 µL, for high MW and adsorbing analytes (max. temp. 600 °C)
961-01275		Sintered Glass liner with Taper, silanized ~ 50 µL, for polar - high MW and adsorbing analytes (max. temp. 320 °C)

Each P/N includes 5 deactivated liners.